Laser 6521.0 Brake Caliper Socket, 26 mm, 1/2-inch Dia


Laser 6521.0 Brake Caliper Socket, 26 mm, 1/2-inch Dia


Applications include: Scania and DAF brake calipers Air impact quality Manufactured from SCM440 Chrome molybdenum with black phosphate finish Also suitable for general applications where 26mm air impact tool is required Length 43mm x Single Hex...


Laser 4850 Brake Pipe Flaring Tool Kit


Laser 4850 Brake Pipe Flaring Tool Kit


Designed for ease of use. Produces high quality pipe flares on the vehicle. Designed for ease of use and packed in metal storage case Produces high quality pipe flares on the vehicle. Creates SAE and DIN single and double flares (3/16" and 1/4" pipe). Complete with reamer for deburring. Consumables available: 6mm Die - Part No 2182, Punches: 3/16" - Part No 3042, 3/16"- Part No 3046, 1/4" Punch -...


Laser 2906 Brake Bleeding Kit


Laser 2906 Brake Bleeding Kit


A simple kit for bleeding brakes. Complete with 3 adaptors for most vehicles. Simple method for bleeding brakes Complete with 3 adaptors Tubing and container included Time saving...


Laser 5093 Disc Brake Piston Spreader


Laser 5093 Disc Brake Piston Spreader


Selected steel. Helps to prevent damage to pistons. Suitable for a wide range of ATE | Delco | Bendix and Girling calipers. Time saver, essential tool. Can be used with a T-bar, 1/2"D ratchet or spanner. Opening: Min 12.5mm Max 92.5mm...


Laser - 4048 Brake Pipe Flaring Tool


Laser - 4048 Brake Pipe Flaring Tool


This Brake Flaring Tool Set is designed to be used in conjunction with a bench vice. The turn key has dies for producing single and double flares in 4.75mm | 3/16" | 1/4" | 5/16" | 3/8". The set comprises of 4 sizes of clamping blocks for holding the brake pipes (3/16"(4.75mm), 1/4" | 5/16" | 3/8"). Spare dies are also available. Supplied in a blow mould case. Additional sizes available...


Laser 4048 Brake Pipe Flaring Tool


Laser 4048 Brake Pipe Flaring Tool


For single and double flares in Imperial and Metric Sizes 3/16-1/4-5/16 and 4.75mm, 6mm 8mm Designed to be used in conjunction with a bench vice. The turn key has dies for producing single and double flares in 4.75mm | 3/16" | 1/4" | 5/16" | 3/8". The set comprises of 4 sizes of clamping blocks for holding the brake pipes (3/16" (4.75mm) | 1/4" (6.35mm) | 5/16" (8mm) | 3/8" (9.525mm). Spare dies...


Laser Tools Brake Pipe Flaring Tool


Laser Tools Brake Pipe Flaring Tool


Laser Tools Brake Pipe Flaring...


Laser 5838 2-Pin Drive Adjustable Brake Rewind Adaptor


Laser 5838 2-Pin Drive Adjustable Brake Rewind Adaptor


Brake Rewind Adaptor - Adjustable 2 Pin Dr Registered Design Can be used with Laser 3993/3991/5626/3835/5605/3476 Adjustable therefore can be used on 100s of cars Two pin drive Made in Sheffield...


Laser 5751 Adjustable Brake Caliper Rewind Tool


Laser 5751 Adjustable Brake Caliper Rewind Tool


Brake Caliper Re-Wind Tool - Adjustable Universal adjustable brake caliper rewind tool Features left and right hand screw thread which increases the number of vehicles it can be used on Complete with reaction plate Adjustable adaptor for a wide variety of vehicles Over 1500 applications...